Skip to content
JAI SHREE INDUSTRIESArchitectural Metal & Filtration · Mumbai

ISO 9001:2015—BHAYANDAR, MUMBAI

Architectural metal& filtration mediabuilt to drawing

Perforated aluminium facades, expanded jali, ceiling mesh and demister pads — from a plant that has been perforating metal in Bhayandar since 1985.

Get a quoteDesign a patternExplore products
In Bhayandar
40yrsIn Bhayandar
Max perforation
12mmMax perforation
Max sheet
2.2×4mMax sheet

What we make

Four ways weshape metal

Pune makes it by the tonne. Mumbai makes it to the drawing — project quantities, specialty alloys, and patterns specified by open area rather than part number.

Pattern designer

Specify it here.We'll tell you if we can make it.

Move the sliders and watch the sheet redraw at true proportion. Open area, ligament and weight compute live — and are checked against our actual tooling before you send anything.

60° staggered
5.0mm
8.0mm
2.0mm
Material
35.4%
Open area
3.0mm
Ligament
10.2
kg/m²
Manufacturable as specified
Send this specRequest a quote
Open the full designer

Adds square, hex and slot holes, straight pitch, sheet sizing, hole count and a shareable spec sheet.

The limits

Engineeredto the edge

Most suppliers publish only what flatters them. These are the numbers our tooling actually holds — the same ones the pattern designer checks your drawing against.

Full capability sheet

Max perforation

0mm

Above this we move to the fibre laser.

Max laser cutting

0mm

Any drawing, any of our metals.

Minimum hole

= thickness

A 6 mm plate takes a 6 mm hole, not smaller. It is the rule that catches most drawings.

Max sheet size

2200 × 4000

Millimetres, width by length.

Specify it yourself

Tools no one elsein this trade has

Round · Square · Hex · Slot

Pattern designer

Round, square, hex and slot holes with live open area, ligament, hole count and weight — validated against real tooling limits.

Tells you when we cannot make it, then offers the nearest pattern we can.

Open the tool

Souders–Brown sizing

Demister selector

Size a knitted-mesh mist eliminator from vessel diameter, gas velocity and densities using the Souders–Brown relation.

Detects flooding and calculates the vessel diameter that fixes it.

Open the tool

Industries

Six sectors,six problems

Our story

Delhi, 1970.Bhayandar, 1985.

The group began in Delhi in 1970 making wire mesh. The Mumbai plant followed in 1985, set up by Inder and Shyam Jangid — and it is still the family running it.

Privately owned, no debt, with stock of raw material held in-house. That is what lets us take the one-off job the tonnage plants turn down.

Read the full story

  1. 1970

    Founded in Delhi — wire mesh

  2. 1980

    Perforated sheets and expanded metal

  3. 1985

    Bhayandar plant established

  4. 2013

    Conversion to CNC

  5. 2015

    Fibre laser and welded mesh

  6. Today

    Facade, filtration and specialty alloys

Where we are

Three units.One city.

  • Jai Shree Industries

    Plant

    Manufacturing plant

    Factory L-8, L-9, L-11Swastik Industrial Estate, Goddev RoadNear Phatak, Behind Gaurav Dharam KantaBhayandar EastMumbai — 401105
    Get directions ↗

  • Jai Shree Filtration

    Trade counter & filtration

    Shop No. 80-B, Ground FloorKeshavji Jadhavji Building, 24/26Khadak Street, Near Satkar HotelMasjid Bunder RoadMumbai — 400009
    Get directions ↗

  • Jai Shree Perforator

    Palghar unit

    2, Marudhar EstateVillage Aliyali, Next to Tembhode VillageNew Satpati RoadPalghar West — 401404
    Get directions ↗

Send usa drawing

DXF, PDF or a photograph of a sketch. We come back with feasibility, material options and a price — usually the same day.

Get a quoteUse the enquiry form+91 93202 04154

Same-day response◆ISO 9001:2015◆Export ready